Solid particle erosive wear behaviour of flame sprayed ceramic coatings
Özet
Variety thermal spray coatings are used to improve wear performance and life span of part in many industrial applications. The solid particle erosive wear mechanisms of the lamellar structured thermal spraying coatings are not still clearly understood. In this study, the wear behavior of different oxide based coatings produced using the flexicord flame spray gun developed in recent years has been investigated on many aspects. The wear rates of flame spray coatings in different composition (alumina, chromia, spinel, zirconate) and thicknesses were compared. In order to determine the effect of heat treatment on the wear performance, heat treatment was performed at 700?C for 60 h and the wear rate of the coatings were measured. As a result, coating quality, thickness and composition have been found to play an important role in erosive wear behavior. It has been observed that the wear rates vary depending on the different angle of impact. Discontinuities in the coating structure, splat thickness and porosity seem to affect the wear resistance of the coating. As a result of the work, it is understood that oxide based flame spray coatings increase the wear resistance of the metallic part. Among these coatings, the best wear performance has been demonstrated by chromium oxide coatings. © 2019 Polish Academy of Sciences. All rights reserved.
Kaynak
Acta Physica Polonica ACilt
135Sayı
5Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Effect of coating degradation on the hot corrosion behavior of yttria-stabilized zirconia (YSZ) and blast furnace slag (BFS) coatings
Karaoglanli, Abdullah Cahit; Ozgurluk, Yasin; Gulec, Ahmet; Ozkan, Dervis; Binal, Gulfem (Elsevier B.V., 2023)In order to provide thermal insulation thermal barrier coatings (TBCs) used in gas turbine engine components under conditions of impure fuels and high turbine inlet temperatures are expected to have hot corrosion resistance. ... -
Structural characteristics, oxidation performance and failure mechanism of thermal barrier coatings fabricated by atmospheric plasma spraying and detonation gun spraying
Ozgurluk, Yasin; Gulec, Ahmet; Ozkan, Dervis; Binal, Gulfem; Cahit Karaoglanli, Abdullah (Elsevier Ltd, 2023)In recent years, thermal barrier coatings (TBCs) are widely applied to the surface of gas-turbine engines to prolong the service life of high temperature components. The increase in raw material requirements and costs has ... -
Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating
Özkan, Derviş; Güleç, Ahmet; Öğe, Mecit; Özgürlük, Yasin; Binal, Gülfem; Çaliş, İbrahim; Sünbül, Sefa Emre; Kaplan, Mustafa; Gök, Mustafa Sabri; Özbek, Yıldız Yaralı; Erdoğan, Garip; Yılmaz, Sefa Erdem; Odabaş, Okan; Olgun, Elif; Karaoğlanlı, Abdullah Cahit (Springer, 2024)Metallurgical slags can be re-evaluated depending on their structural properties for reuse in many industrial applications. This study investigated the possibility of reusing these slags as a commercial value.The results ...